Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Yamane, Yuichi
Journal of Nuclear Science and Technology, 59(11), p.1331 - 1344, 2022/11
Times Cited Count：0 Percentile：0.01(Nuclear Science & Technology)The reactivity was estimated from a time profile of neutron count rate or a simulated data in a quasi-steady state after sudden change of reactivity or external neutron source strength. The estimation was based on the equation of power in subcritical quasi-steady state. The purpose of the study is to develop the method of timely reactivity estimation from complicated time profile of neutron count rate. The developed method was applied to the data simulating neutron count rate created by using one-point kinetics code, AGNES, and Poisson-distributed random noise and to the transient subcritical experiment data measured by using TRACY. The result shows that the difference of the estimated and reference value was within about 5% or less for (
-1) for simulated data and within about 7% or less for 
-1.4 and -3.1 for the experimental data. It was also shown that the possibility of the reactivity estimation several ten seconds after the status change.
Yamane, Yuichi
Journal of Nuclear Science and Technology, 57(8), p.926 - 931, 2020/08
Times Cited Count：1 Percentile：11.8(Nuclear Science & Technology)An equation of power in subcritical quasi-steady state has been derived based on one-point kinetics equations for the purpose of utilizing it for the development of timely reactivity estimation from complicated time profile of neutron count rate. It linearly relates power, 
, to a new variable 
, which is a function of time differential of the power. It has been confirmed by using one-point kinetics code, AGNES, that the calculated points (
) are perfectly in a line described by the new equation and that points () calculated from transient subcritical experiments by using TRACY made a line with a slope indicated by the new equation.
Ho, H. Q.; Ishitsuka, Etsuo
Physical Sciences and Technology, 5(2), p.53 - 56, 2019/00
Increasing of tritium concentration in the primary coolant of the research and test reactors during operation had been reported. To check the source for tritium release into the primary coolant during operation of the JMTR and the JRR-3M, the tritium release from the driver fuels was calculated by MCNP6 and PHITS. It is clear that the calculated values of tritium release from fuels are as about 10
and 10
Bq for the JMTR and JRR-3M, respectively, and that calculated values are about 4 order of magnitude smaller than that of the measured values. These results show that the tritium release from fuels is negligible for both the reactors.
Hayashi, Hirokazu; Sato, Takumi; Shibata, Hiroki; Tsubata, Yasuhiro
NEA/NSC/R(2017)3, p.427 - 432, 2017/11
Transmutation of long-lived radioactive nuclides including minor actinides (MA: Np, Am, Cm) has been studied in Japan Atomic Energy Agency (JAEA). Pb-Bi cooled sub-critical accelerator-driven system (ADS) is regarded as one of the powerful tools for transmutation of MA under the double strata fuel cycle concept. Uranium-free MA-Pu nitride fuel was chosen as the first candidate for MA transmutation. Reprocessing of spent ADS fuel and reusing MA recovered from the spent ADS fuels is necessary to improve the transmutation ratio. A pyrochemical process has been proposed as the first candidate for reprocessing of the spent nitride fuel for MA transmutation, because this technique has some advantages over aqueous process, such as the resistance to radiation damage, which is an important issue for the fuels containing large amounts of highly radioactive MA, and feasibility for recovering expensive N-15 in the spent fuels to be reused. This paper overviews the current status of the technology development, including our recent study. Development of the anode suitable for electro-refining of nitride fuels and that of the apparatus for renitridation of the metals recovered in Cd cathode for 100g-Cd scale cold tests are main topics. Evaluation of the batch sizes of each process, which is necessary for estimating the scale of the engineering-apparatus, with considering the decay heat of MA and FP, will also be introduced.
Amaya, Masaki; Udagawa, Yutaka; Narukawa, Takafumi; Mihara, Takeshi; Taniguchi, Yoshinori
Proceedings of 2017 Water Reactor Fuel Performance Meeting (WRFPM 2017) (USB Flash Drive), 10 Pages, 2017/09
Shinohara, Masanori; Ishitsuka, Etsuo; Shimazaki, Yosuke; Sawahata, Hiroaki
JAEA-Technology 2016-033, 65 Pages, 2017/01
JAEA-Technology-2016-033.pdf:11.14MB
To reduce the neutron exposure dose for workers during the replacement works of the startup neutron sources of the High Temperature Engineering Test Reactor, calculations of the exposure dose in case of temporary neutron shielding at the bottom of fuels handling machine were carried out by the PHITS code. As a result, it is clear that the dose equivalent rate due to neutron radiation can be reduced to about an order of magnitude by setting a temporary neutron shielding at the bottom of shielding cask for the fuel handling machine. In the actual replacement works, by setting temporary neutron shielding, it was achieved that the cumulative equivalent dose of the workers was reduced to 0.3 man mSv which is less than half of cumulative equivalent dose for the previous replacement works; 0.7 man mSv.
Sasaki, Shinji; Tanno, Takashi; Maeda, Koji
Proceedings of 54th Annual Meeting of Hot Laboratories and Remote Handling (HOTLAB 2017) (Internet), 6 Pages, 2017/00
During irradiation in a fast reactor, the microstructure change of the mixed oxide fuels and the changes of element distributions occur because of a radial temperature gradient. Therefore, it is important to study the irradiation behavior of MA-MOX for advancement of fast reactor fuels. In order to make detailed observations of microstructure and elemental analyses of MA-MOX, irradiated MA-MOX specimens were carried out PIE by using a FE-SEM equipped with WDX. Because fuel samples have high radio activities and emit alpha-particles, the instrument was modified. the instrument was installed in a lead shield box and the control unit was separately located outside the box. The microstructure changes were observed in irradiated MA-MOX specimen. The characteristic X-rays peaks were detected successfully. By measuring the intensities of characteristic X-rays, it was tried quantitative analysis of U, Pu, Am along radial direction of irradiated specimen.
Kato, Masato; McClellan, K.*
Transactions of the American Nuclear Society, 113(1), p.613 - 614, 2015/10
A joint study on advanced oxide fuels is being carried out under the Civil Nuclear Energy Working Group (CNWG) bilateral collaboration between the U.S. Department of Energy and the Japan Atomic Energy Agency. The main goal of this study is to support development and validation of a science-based fuel analysis code for minor actinide (MA) bearing MOX fuel. In analysis and evaluation of fuel performance, it is essential to understand the physical properties of the advanced oxide fuels. Therefore, we are investigating physical properties of (U,Pu)O
, (U,Ce,)O, PuO, CeO and other related compounds to prepare a physical property database and to construct an integrated mechanistic physical property model. In this paper, we describe the derivation of a model to represent heat capacity and thermal conductivity of (U,Pu)O
that is based on the experimental database.
Tanaka, Kosuke; Sasaki, Shinji; Katsuyama, Kozo; Koyama, Shinichi
Transactions of the American Nuclear Society, 113(1), p.619 - 621, 2015/10
In order to evaluate the microstructural change behavior of Am-MOX fuels at the initial stage of irradiation, detailed investigations using image analysis were performed on X-ray Computed Tomography (X-ray CT) images and on ceramographs from fuels irradiated in both B11 and B14.
Yasuda, Ryo; Matsubayashi, Masahito; Nakata, Masahito; Matsue, Hideaki; Nakanishi, Tomoko
Dai-5-Kai Hoshasen Ni Yoru Hihakai Hyoka Shimpojiumu Koen Rombunshu, p.31 - 34, 2005/02
Neutron radiography is an effectively nondestructive tool for inspection of irradiated nuclear fuels and materials. Neutron CT an neutron imaging plate methods, which are advanced techniques in the neutron radiography, enabled to obtain cross-section images and to evaluate an amount of the element compositions. This paper describes results of those methods using unirradiated fuels and materials and discussed the practicability of those methods to irradiated fuels and materials.
Ito, Mitsuo; Obara, Kazuhiro; Toida, Yukio*; Suzuki, Daisuke; Gunji, Katsubumi*; Watanabe, Kazuo
JAERI-Review 2004-007, 65 Pages, 2004/03
JAERI-Review-2004-007.pdf:5.53MB
no abstracts in English
Department of Nuclear Energy System
JAERI-Review 2003-023, 232 Pages, 2003/09
JAERI-Review-2003-023.pdf:16.58MB
The Department has carried out researches and developments (R&Ds) of innovative nuclear energy system and their related fundamental technologies to ensure the long-term energy supply in Japan. The report deals with the R&Ds of an innovative water reactor, called Reduced-Moderation Water Reactor (RMWR), which has the capability of multiple recycling and breeding of plutonium using light water reactor technologies. In addition, as basic studies and fundamental researches of nuclear energy system in general, described are intensive researches in the fields of reactor physics, thermal-hydraulics, nuclear data, nuclear fuels, and materials. These activities are essential not only for the R&Ds of innovative nuclear energy systems but also for the improvement of safety and reliability of current nuclear energy systems. The maintenance and operation of reactor engineering facilities belonging to the Department support experimental activities.
Hiura, Nobuo*; Yamaura, Takayuki; Motohashi, Yoshinobu*; Kobiyama, Mamoru*
Nihon Genshiryoku Gakkai Wabun Rombunshi, 1(2), p.202 - 208, 2002/06
The purpose of this study is to develop oxygen sensor which can measure the oxygen potential of the fuel in a nuclear reactor. The oxygen sensor with CaO stabilized zirconia solid electrolyte has been specially designed in order to prolong its life time. Electromotive force (EMF) of solid galvanic cell Ni/NiO|ZrO-CaO|Fe/FeO was measured in both the out-pile tests and the in-situ tests using Japan Material Testing Reactor (JMTR), and the characteristics of EMF was discussed. In the out-pile test, it was found that the EMF was almost equal to the theoretical values at temperatures ranging from 700 to 1,000
, and the life span of the sensor was very long up to 980h at 800. In the in-situ test, it was found that the EMF showed almost the reliable values up to 300 h (neutron fluence (E 1 MeV) 1.5
10
m
), at temperatures from 700 to 900. The imprecision of the EMF was found to be within 6% of the theoretical values up to 1,650 h irradiation time (neutron fluence (E 1 MeV) 8.010 m) at 800. The oxygen sensors were found to be applicable for the oxygen potential measurement of the fuels in a reactor.
Yanagisawa, Kazuaki; Yamashita, Toshiyuki; Kanazawa, Hiroyuki; Amano, Hidetoshi; Muromura, Tadasumi
Journal of Nuclear Science and Technology, 36(12), p.1153 - 1159, 1999/12
Times Cited Count：0 Percentile：0.01(Nuclear Science & Technology)no abstracts in English
*; J.Huang*; *; *; *; Yamaguchi, Kenji*; Sugimoto, Jun
JAERI-Tech 98-003, 32 Pages, 1998/02
no abstracts in English
Kosaka, Atsuo; ; Sugimoto, Jun
10th Pacific Basin Nuclear Conf. (10-PBNC), 1, p.341 - 346, 1996/00
no abstracts in English
; Uchiyama, Junzo; Sato, Hiroshi
Dai-17-Kai Kaku Busshitsu Kanri Gakkai Nihon Shibu Nenji Taikai Rombunshu, 0, p.1 - 4, 1996/00
no abstracts in English
Watanabe, Kazuo;
Bunseki, 1993(11), p.883 - 889, 1993/00
no abstracts in English
; Niimi, Motoji; Ito, Noboru; Ando, Hiroei; *; Oyamada, Rokuro
JAERI-M 87-202, 36 Pages, 1987/11
no abstracts in English
; ; ; Iwamoto, K.
JAERI-M 86-046, 17 Pages, 1986/03
no abstracts in English
